銅或銅鹽催化下進行芳酰胺化的反應。此反應最早由德國女化學家、Fritz Ullmann 的妻子 Irma Goldberg 發現。但此反應有一些缺點：（1）反應溫度一般是140℃，甚至更高；（2）部分的反應需要一個摩爾或更多的銅參與反應；（3）一般需要在高極性而且毒性較大的溶劑中進行。近年來，利用合適的配體，把銅的使用量縮減到了催化量。該反應不需要使用昂貴的Pd金屬，在經濟性上是十分有優勢的。【】

九十多年后， Ukita 報道了幾種芳香溴和碘代物和芳酰胺在以DMF為溶劑，120℃下，碳酸鉀為堿可以順利反應.

此反應經過發展可以在1，2-二胺類化合物做配體，K3PO4, K2CO3 和 Cs2CO3 做堿的條件下，在較溫和的條件下進行。

常用的銅鹽有:

Cu

CuI

CuCl

CuSCN

Cu2O

CuCl2

CuSO4·5H2O

CuO

Cu(OAc)2

Cu(acac)2

常用的配體有：N,N’-二甲基乙二胺和N,N’-二甲基環己二胺。關于配體對反應的作用，Buchwald認為配體的存在有助于提高銅鹽的溶解性，阻礙催化劑的分解，減少副產物的生成，從而有利于反應。

溶劑：通常碘代物參與的芳酰胺化反應在大多數非質子溶劑如甲苯、二氧六環、THF，甚至DMF中都可以順利進行。極性大的酰胺、乙酰胺和乳酰胺用DMF做溶劑要好于甲苯做溶劑。大部分的報道認為極性溶劑對銅催化的偶聯反應至關重要。盡管異丙醇與水等質子性溶劑可以使用，非質子性極性溶劑往往給出最佳效果。

堿：堿的選擇也起到了一個非常重要的作用。芳基碘的芳酰胺化，K3PO4的效果最好。如果改用K2CO3，則反應會慢很多。一般情況下，芳基溴比芳基碘的反應慢很多。有些情況下，芳基溴的酰胺化用K3PO4做堿效果會很差，換成K2CO3做堿則會好很多。研究表明，酰胺脫質子的速度與芳酰胺化的速度成正比。如果酰胺脫質子過快，則會由于形成鈍化的銅鹽絡合物阻礙芳酰胺化的進行。也就是說對于酸性強度高的酰胺或反應活性弱的鹵代芳烴盡量用弱堿。

合成示例一:

RepresentativeProcedures: N- (2-Methylphenyl) acetamide

A Schlenk tube was charged with CuI (9.6 mg, 0.050 mmol,5.0 mol %), acetamide (90 mg, 1.5 mmol), and K3PO4 (430mg, 2.03mmol), evacuated, and backfilled with argon. N,N￠-Dimethylethylenediamine(11ul, 0.10 mmol, 10 mol %), 2-iodotoluene (128 ul,1.01mmol), and dimethylformamide (1.0 mL) were added under argon. The Schlenk tube was sealed with a Teflonvalve and the reaction mixture was stirred at 80℃ for23 h. The resulting pale brown suspension was allowed to reach room temperatureand filtered through a 0.5 ×1 cm pad ofsilica gel eluting with 10 mL of ethyl acetate. The filtrate was concentratedand the residue was purified by flash chromatography on silica gel (2 ×15 cm; hexanes-ethyl acetate 1:4; 15 mL ractions). Fractions8-16provided 143 mg (95% yield) of the product as pale yellow fine needles.

合成實例二:

An Schlenk tubewas charged with CuI (9.6 mg, 0.050 mmol, 5.0 mol %), amide (60 mg, 0.25 mmol),and K3PO4 (100mg, 2.0eq), evacuated, and backfilled with N2. ethylenediamine(30 ul, 10mol %), iodotoluene (62 mg, 1.2eq), and 1,4-dioxane (2.0 mL) were added under N2. The tube was sealed with a Teflon valveand the reaction mixture was stirred at 120℃ for 48hrs. The resulting suspension wasallowed to reach room temperature and filtered through a 0.5 ×1 cm pad of silica gel eluting with 10 mL of ethylacetate. The filtrate was concentrated and the residue was purified by flashchromatography on silica gel (2 ×15 cm; hexanes-ethyl acetate1:4; 15 mL ractions). We can obtain 63 mg (80% yield) product as white solid.

本文非原創內容，版權歸原作者所有，如涉及版權問題，請聯系本號刪除。